1 n-channel 20 v (d-s) mosfet fe atures ? trenchfet ? power mosfet applicat ions ? load switching for portable devices ? dc/dc converter notes: a. surfa ce mounted on 1" x 1" fr4 board. b. pulse width limited by maximum junction temperature. product summary v ds (v) r d s(on) ( ? )i d (a ) q g (t yp.) 20 0.057 at v gs = 4.5 v 2.9 3.5 0.075 at v gs = 2.5 v 2.6 g s d t op view 2 3 t o-236 (so t-23) 1 absolute maximum ratings (t a = 25 c, unless otherwise noted) p arameter symbol 5 s steady state unit drain-source voltage v ds 20 v gat e-source voltage v gs 8 contin uous drain current (t j = 150 c) a t a = 25 c i d 2. 9 2.6 a t a = 70 c 2. 3 2.1 pulsed drain current b i dm 10 contin uous source current (diode conduction) a i s 0.7 2 0.6 power dissipation a t a = 25 c p d 0.8 6 0.71 w t a = 70 c 0.5 5 0.46 operating junction and storage temperature range t j , t stg - 55 to 150 c thermal resistance ratings p arameter symbol typical maximum unit maximum junction-to-ambient a t ? 5 s r thj a 120 145 c/w steady state 140 175 maximum junction-to-foot steady state r thjf 62 78 dts 4 www. daysemi.jp
2 no tes: a. pulse test: pulse width ? 300 s, duty cycle ? 2 %. b. guaranteed by design, not s ubject to production testing. st resses beyond those listed under ?absolute maximum ratings? ma y cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. ty pical characteristics (25 c, unless otherwise noted) s pecifications (t a = 25 c, unless otherwise noted) p arameter symbol test conditions limits unit min. typ. max. static drain-source breakdo wn voltage v ds v gs = 0 v, i d = 250 a 20 v gate-thre shold voltage v gs(t h) v ds = v gs , i d = 250 a 0. 40 0.85 gate-body leakage i gss v ds = 0 v , v gs = 8 v 100 na zero gate voltage drain current i dss v ds = 20 v , v gs = 0 v 0.1 a v ds = 20 v , v gs = 0 v , t j = 50 c 4 v ds = 20 v , v gs = 0 v , t j = 70 c 15 on-state drain current a i d( on) v ds ?? 10 v , v gs = 4.5 v 6a drain-source on-resistance a r ds( on) v gs = 4.5 v , i d = 3.6 a 0.045 0.057 ? v gs = 2.5 v , i d = 3.1 a 0.056 0.075 forward transconductance a g fs v ds = 5 v , i d = 3.6 a 13 s diode forward voltage v sd i s = 0.95 a, v gs = 0 v 0.7 1.2 v dy namic b t otal gate charge q g v ds = 10 v, v gs = 4.5 v , i d = 3.6 a 3.5 5.5 nc gate-source charge q gs 0.6 gate- drain charge q gd 0.45 g ate resistance r g f = 1 mhz 2 4 8 ? switc hing tu r n - o n d e l ay t i m e t d( on) v dd = 10 v , r l = 2.78 ? i d ? 3.6 a, v gen = 4.5 v , r g = 1 ? 81 5 ns rise time t r 71 5 turn-off delay time t d( off) 30 45 fall time t f 71 5 source-drain reverse recovery time t rr i f = 3.6 a, di/dt = 100 a/s 8.5 15 body diode reverse recovery charge q rr 24 nc ou tput characteristics 0 2 4 6 8 10 0.0 0.5 1.0 1.5 2.0 v ds - drain-to-so urce v oltage ( v) - drain c u rrent (a) i d v gs =5 v thr u 2 v v gs =1 v v gs =1 .5 v t ransfer characteristics 0 2 4 6 8 10 0.0 0.4 0. 8 1.2 1.6 2.0 v gs - gate-to-so urce v oltage ( v ) - drain c u rrent (a) i d t c = 25 c t c = 125 c t c = - 55 c dts 4 daysemi.jp
3 typica l characteristics (25 c, unless otherwise noted) tran sfer characteristics capacitance on-resistance vs. junction temperature 0.0 0.4 0.8 1.2 1.6 2.0 0.0 0.3 0.6 0.9 1.2 1.5 v gs - gate-to-so urce v oltage ( v ) - drain c u rrent (a) i d t c = 25 c t c = 125 c t c = - 55 c 0 80 160 240 320 400 0 5 10 15 20 c is s v ds - drain-to-so urce v oltage ( v) c - capacitance (pf) c oss c rss 0.6 0.8 1.0 1.2 1.4 1.6 - 50 - 25 0 25 50 75 100 125 150 t j -j unction temperat u re (c) (normalized) - on -resistance r ds(on) v gs =2 .5 v ,i d =3 .1a v gs =4 .5 v ,i d =3 .6a on -resistance vs. drain current gate charge source-drain diode forward voltage 0.03 0.04 0.05 0.06 0.07 02 46 8 10 - on -resistance ( ) r ds( on) i d - drain c u rrent (a) v gs =2 .5 v v gs =4 .5 v i d =3 .6a 0 1 2 3 4 5 012 34 - gate -to-so urce v oltage ( v ) q g - total gate charge (nc) v gs v ds = 15 v v ds =1 0v v ds = 5 v 0.0 0.2 0.4 0.6 0. 8 1.0 1.2 v sd -s o u rce-to-drain v oltage ( v) - source cu rrent (a) i s 1 0.01 0.001 0.1 10 100 t j = 25 c t j = 150 c t j = - 55 c dt 4 daysemi.jp
4 ty pical characteristics (25 c, unless otherwise noted) . on-r esistance vs. gate-to-source voltage single pulse power 0.04 0.06 0.08 0.10 0.12 0 12345 - on -resistance ( ) r ds(on) v gs - gate-to-so urce v oltage ( v ) t j = 25 c t j = 125 c 0 2 4 6 8 10 0.01 0.1 1 10 100 1000 t ime (s) pow er ( w ) t a = 25 c thresh old voltage safe operating area, junction-to-ambient - 0.3 - 0.2 - 0.1 0.0 0.1 0.2 - 50 - 25 0 25 50 75 100 125 150 i d = 250 a v ariance (v) v gs( th) t j - temperat u re (c) i d =1m a v ds - drain-to-so urce v oltage ( v) * v gs > minimu m v gs at which r ds (on) is specified - drain c u rrent (a) i d 10 0.1 0.1 1 10 1 t a = 25 c single p ulse 1m s 10 ms 100 ms 0.01 100 s, dc bvdss limited 100 100 s limited byr ds (on)* 1s 10 s norm alized thermal transient im pedance, junction-to-ambient 10 -3 10 -2 1 10 1000 10 -1 10 -4 100 0.2 0.1 0.05 square w avep ulse du ration (s) normalized effecti v e transient thermal impedance 1 0.1 0.01 single pulse t 1 t 2 notes: p dm 1. d u ty cycle, d = 2. per unit base = r thja = 70 c/ w 3. t jm -t a =p dm z thja (t) t 1 t 2 4. su rface mo u nted d u t y cycle = 0.5 0.02 dt 4 daysemi.jp
package information www. g d \ v h p l m s 1 sot-23 (to-236): 3-lead b e e 1 1 3 2 s e e 1 d a 2 a a 1 c s e a ting pl a ne 0.10 mm 0.004" c c l 1 l q g au ge pl a ne s e a ting pl a ne 0.25 mm dim millimeters inches min max min max a 0.89 1.12 0.0 3 5 0.044 a 1 0.01 0.10 0.0004 0.004 a 2 0.88 1.02 0.0 3 46 0.040 b 0. 3 5 0.50 0.014 0.020 c 0.085 0.18 0.00 3 0.007 d 2.80 3 .04 0.110 0.120 e 2.10 2.64 0.08 3 0.104 e 1 1.20 1.40 0.047 0.055 e 0.95 bsc 0.0 3 74 ref e 1 1.90 bsc 0.0748 ref l 0.40 0.60 0.016 0.024 l 1 0.64 ref 0.025 ref s 0.50 ref 0.020 ref q 3 8 3 8 ecn: s-0 3 946-rev. k, 09-jul-01 dwg: 5479 package information document number: 71196 09-jul-01 www. g d \ v h p l m s 1 sot-23 (to-236): 3-lead b e e 1 1 3 2 s e e 1 d a 2 a a 1 c s e a ting pla ne 0.10 mm 0.004" c c l 1 l q g au ge pl a ne s e a ting pla ne 0.25 mm dim millimeters inches min max min max a 0.89 1.12 0.0 35 0.044 a 1 0.01 0.10 0.0004 0.004 a 2 0.88 1.02 0.0346 0.040 b 0. 35 0.50 0.014 0.020 c 0.085 0.18 0.00 3 0.007 d 2.80 3.04 0.110 0.120 e 2.10 2.64 0.08 3 0.104 e 1 1.20 1.40 0.047 0.055 e 0.95 bsc 0.0 374 ref e 1 1.90 bsc 0.0748 ref l 0.40 0.60 0.016 0.024 l 1 0.64 ref 0.025 ref s 0.50 ref 0.020 ref q 3 8 38 ecn: s-0 3 946-rev. k, 09-jul-01 dwg: 5479
application note www. daysemi.jp 1 application note recommended minimum pads for sot-23 0.106 (2.692) recommended mi nimum pads dimensions in inches/(mm) 0.022 (0.559) 0.049 (1.245) 0.029 (0.724) 0.037 (0.950) 0.053 (1.341) 0.097 (2.459) return to index return to index application note document number: 72609 www. daysemi.jp revision: 21-jan-08 1 application note recommended minimum pads for sot-23 0.106 (2.692) recommended mi nimum pads dimensions in inches/(mm) 0.022 (0.559) 0.049 (1.245) 0.029 (0.724) 0.037 (0.950) 0.053 (1.341) 0.097 (2.459) return to index return to index
legal disclaimer notice www. daysemi.jp 1 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. din-tek intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, din-tek ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. din-tek makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, din-tek disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on din-tek s knowledge of typical requirements that are often placed on din-tek products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify din-tek s terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, din-tek products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the din-tek product could result in personal injury or death. customers using or selling din-tek products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized din-tek personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of din-tek . product names and markings noted herein may be trad emarks of their respective owners. material category policy din-tek intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some din-tek documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. din-tek intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some din-tek documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards. legal disclaimer notice www.daysemi.jp revision: 02-oct-12 1 document number: 72610 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. din-tek intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, din-tek ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. din-tek makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, din-tek disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on din-tek s knowledge of typical requirements that are often placed on din-tek products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify din-tek s terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, din-tek products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the din-tek product could result in personal injury or death. customers using or selling din-tek products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized din-tek personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of din-tek . product names and markings noted herein may be trad emarks of their respective owners. material category policy din-tek intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some din-tek documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. din-tek intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some din-tek documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
